Pre-rinse Faucet Customize OEM ODM 8" Wall Mount,12" Add-On Faucet

Product Description

1. The pre rinse faucet is equipped with brass high-pressure spray valve and EPDM & 304 stainless steel movable hose, which can quickly clean dish dirt;

2. The stainless steel outer shell of the hose reduces tension and wear on the inner hose, extending its life

3. The bottom of the faucet is integrated to effectively eliminate the possibility of leakage

4. The tap is made of low-lead copper, good antibacterial property, good for health

5. Easy to install, disassembly & maintaince,each set of faucets comes with instructions, which can achieve quick installation within 5 minutes

6. 12”(305mm) swing faucet, 360°rotatable, suitable for commercial sinks with 2-3 basins

7. 8 inch wall-mounted faucet base, eccentric nut design, can be installed with a center distance of 196mm-212mm

8. 42" height faucet is convenient for work and can easily clean any corner of the sink

9. Commercial faucet is equipped with 1/2"NPT connector and 1/2"NPSM eccentric flange internal thread water inlet connector

10. The brass compression cartridge can be replaced flexibly, it can be automatically adjusted and easily replaced, the switch can reach 500,000 times, and it is wear-resistant

with spring check valve to prevent backflow and reduce maintenance costs

11. The spray valve adopts low flow design, which is of great significance to water saving

12. There are built-in water sealing washers at the interface of each part of the faucet,no PTFE tape required

13. The length of wall bracket can be cutted to suit a variety of installation environments. The user can cut the deck short according to the actual needs, and the length adjustment of the deck can be completed with a common saw

Packing Info

Inner Packing: 1pc in 1 inner box with EPE foam(box size:68.5*36*8.5cm)

Outer Packing: 3pcs in one carton(carton size:68.5*36.5*24.5cm)

If you need special customized packaging, please contact us.